55349C
1.INSTALL INSTRUMENT PANEL CUSHION
Using a piece of cloth, rub the remaining double-sided tape off the instrument panel.
Installing the instrument panel cushion with any double-sided tape remaining on the instrument panel may cause adhesion failure.
Using a non-residue solvent, clean the attachment surface.
Install a new instrument panel cushion onto the instrument panel.
55356C
2.INSTALL NO. 2 INSTRUMENT PANEL CUSHION
|
Adhesive Portion |
Align the markings on the instrument panel with a new No. 2 instrument panel cushion and install the No. 2 instrument panel cushion using hot-melt glue or double-sided tape.
55355
3.INSTALL NO. 1 INSTRUMENT PANEL CUSHION
|
Adhesive Portion |
Align the markings on the instrument panel with a new No. 1 instrument panel cushion and install the No. 1 instrument panel cushion using hot-melt glue or double-sided tape.
82142
4.INSTALL NO. 2 INSTRUMENT PANEL WIRE (for Automatic Air Conditioning System)
Engage the 3 clamps and install the No. 2 instrument panel wire.
55845A
5.INSTALL NO. 3 HEATER TO REGISTER DUCT
Engage the 2 guides and install the No. 3 heater to register duct.
Install the 2 screws <C>.
86101
6.INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD)
86101
7.INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD)
55084E
8.INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY
Engage the 3 guides and install the No. 1 heater to register duct sub-assembly.
Install the 3 screws <C>.
73970A
9.INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (w/ Airbag System)
55041A
10.INSTALL AIRBAG PASSENGER MOUNTING BRACKET SUB-ASSEMBLY (w/o Airbag System)
Install the airbag passenger mounting bracket sub-assembly with the 2 nuts <F>.
55431B
11.INSTALL UPPER INSTRUMENT PANEL FINISH PANEL (w/o Airbag System)
Engage the 12 claws and install the upper instrument panel finish panel.
55085
12.INSTALL NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY
Engage the 3 guides and install the No. 2 heater to register duct sub-assembly.
Install the 3 screws <C>.
55950G
13.INSTALL DEFROSTER NOZZLE ASSEMBLY
Engage the 3 guides and install the defroster nozzle assembly.
Install the 3 screws <C>.
55318C
14.INSTALL INSTRUMENT SIDE PANEL LH
Engage the 5 claws and the 3 guides and install the instrument side panel LH.
55317A
15.INSTALL INSTRUMENT SIDE PANEL RH
Use the same procedure as for the LH side.
55627A
16.INSTALL INSTRUMENT PANEL CUP HOLDER RAIL (for Front Passenger Side)
Engage the 2 guides and install the instrument panel cup holder rail.
Install the 3 screws <C>.
55627A
17.INSTALL INSTRUMENT PANEL CUP HOLDER RAIL (for Driver Side)
Engage the 2 guides and install the instrument panel cup holder rail.
Install the 3 screws <C>.
55434F
18.INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Engage the 5 claws and install the lower center instrument panel finish panel.
55434B
19.INSTALL NO. 2 LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for LHD)
Engage the 2 claws and the 2 clips and install the No. 2 lower center instrument panel finish panel.
55434B
20.INSTALL NO. 2 LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for RHD)
Engage the 4 claws and the clip and install the No. 2 lower center instrument panel finish panel.
88625H
21.INSTALL COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System)
88625Q
22.INSTALL COOLER (ROOM TEMPERATURE SENSOR) THERMISTOR (for Automatic Air Conditioning System)