Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING(for Sedan) › 2013.08–2017.10
RM30M0E _58 Vehicle Interior _017120 INTERIOR PANELS / TRIM _0089079 ROOF HEADLINING(for Sedan) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(for Sedan)  REASSEMBLY  


PROCEDURE

Hide 82171 1.INSTALL NO. 1 ROOF WIRE

a.

Align the positioning tape of the No. 1 roof wire with the protrusion of the roof headlining and wrap new adhesive tape around them as shown in the part of the illustration labeled A.

B342722C01
1.615,2.458 1.375,2.333 false 1.667,2.396 1.979,2.552 0.313,0.156 10 false *a 5.365,1.167 5.677,1.323 0.313,0.156 10 false A
*a Marking - -
V100155

Adhesive Tape
V100143

Positioning Tape



b.

Align the No. 1 roof wire positioning tape with the markings of the roof headlining.


c.

Install the No. 1 roof wire onto the roof headlining with 5 new adhesive tapes.


Hide 86101J 2.INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY

Hide 63341 3.INSTALL NO. 1 ROOF SILENCER PAD

a.

Align the markings on the roof headlining with the No. 1 roof silencer pad and install the No. 1 roof silencer pad using hot-melt glue as shown in the illustration.

B346923C01
2.875,1.833 2.542,1.417 false 2.927,1.813 3.24,2.01 0.313,0.198 10 false *a
*a Marking - -


NOTICE:

Securely attach the No. 1 roof silencer pad before the hot-melt glue cools.