1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
88712
2.DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE
88706A
3.DISCONNECT LIQUID TUBE SUB-ASSEMBLY A
88515
4.REMOVE NO. 1 EXPANSION VALVE
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.
| *a | Bolt for No. 1 Cooler Refrigerant Suction Hose |
Temporarily attach the bolt for the No. 1 cooler refrigerant suction hose halfway to the No. 1 expansion valve.
Hold the bolt and pull it to remove the No. 1 expansion valve as shown in the illustration.
| *1 | No. 1 Cooler Evaporator Sub-assembly |
Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.