55606
1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55432B
2.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (for LHD)
55432B
3.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)
55550
4.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
55902C
5.REMOVE AIR CONDITIONING PANEL SUB-ASSEMBLY
Disengage the 5 clips and remove the air conditioning panel sub-assembly.
55900A
6.REMOVE HEATER CONTROL AND ACCESSORY ASSEMBLY
Disengage the 4 claws and remove the heater control and accessory assembly.
Disengage the clamp and separate the air inlet damper control cable sub-assembly.
Disengage the claw and remove the cable ring from the air inlet damper control link.
Disengage the clamp and separate the defroster damper control cable sub-assembly.
Disengage the claw and remove the cable ring from the defroster damper control link.
Disengage the clamp and separate the air mix damper control cable sub-assembly.
Disengage the claw and remove the cable ring from the air mix damper control link.
55906A
7.REMOVE DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY
Spread the claws and pull out the outer cable.
Disengage the claw and remove the defroster damper control cable sub-assembly.
55908A
8.REMOVE AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY
Spread the claws and pull out the outer cable.
Disengage the claw and remove the air inlet damper control cable sub-assembly.
55909C
9.REMOVE AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY
Spread the claws and pull out the outer cable.
Disengage the claw and remove the air mix damper control cable sub-assembly.