Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR › 2013.08–2017.10
RM30M0E _53 Suspension _017095 FRONT SUSPENSION _0090099 FRONT STABILIZER BAR A

FRONT SUSPENSION  FRONT STABILIZER BAR  INSTALLATION  


PROCEDURE

Hide 48815E 1.INSTALL FRONT STABILIZER BAR BUSH

a.
C289571C01
2.656,1.521 2.865,1.135 true 2.5,1.479 2.719,1.635 0.219,0.156 10 false *1
*1 Bush Stopper
V100135

Front of the Vehicle
V100136

Outside of the Vehicle


Install the 2 front stabilizer bar bushes to the front stabilizer bar as shown in the illustration.

HINT:
·

Install the front stabilizer bar bush to the front stabilizer bar so that the bush stopper of the front stabilizer bar faces the outside of the vehicle.

·

Install the front stabilizer bar bush so that the cutouts face the front of the vehicle.




Hide 48811 2.INSTALL FRONT STABILIZER BAR

a.

Install the front stabilizer bar to the front suspension crossmember sub-assembly.


Hide 48829A 3.INSTALL FRONT NO. 1 STABILIZER BRACKET LH

a.
C284277E01
1.438,1.698 1.563,1.906 0.125,0.208 10 true A 2.396,0.813 2.521,1.01 0.125,0.198 10 false B

Temporarily install the front No. 1 stabilizer bracket LH to the front suspension crossmember sub-assembly with the 2 bolts.


b.

Fully tighten the bolts to the specified torque, in the order of B then A.

Torque:
47 N*m (479 kgf*cm, 35 ft.*lbf)


Hide 48824A 4.INSTALL FRONT NO. 1 STABILIZER BRACKET RH

HINT:

Use the same procedure described for the LH side.


Hide 5.INSTALL STEERING LINK ASSEMBLY

Hide 51201 6.INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY