Home › Engine / Hybrid System › 1NZ-FE STARTING › ENGINE SWITCH › 2013.08–2016.10
RM30M0E _51 Engine / Hybrid System _017085 1NZ-FE STARTING _0090215 ENGINE SWITCH A

1NZ-FE STARTING  ENGINE SWITCH  REMOVAL  


PROCEDURE

Hide 55606 1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 55432B 2.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL

Hide 45287 3.REMOVE LOWER STEERING COLUMN COVER

Hide 89611 4.REMOVE ENGINE SWITCH

a.
A307903

Disengage the 2 claws to separate the engine switch from the No. 2 lower center instrument panel finish panel.


b.

Disconnect the engine switch connector to remove the engine switch.