51442C
1.REMOVE ENGINE UNDER COVER LH (w/o Metal Type Under Cover)
51451A
2.REMOVE CENTER ENGINE UNDER COVER (w/ Metal Type Under Cover)
51405A
3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Metal Type Under Cover)
84540
4.ADJUST PARK/NEUTRAL POSITION SWITCH
Apply the parking brake and move the shift lever to N.
Loosen the 2 bolts of the park/neutral position switch.
| *a | Neutral Basic Line |
| *b | Protrusion |
Rotate the park/neutral position switch clockwise or counterclockwise to align the neutral basic line with the protrusion as shown in the illustration.
Hold the park/neutral position switch in this position and tighten the 2 bolts.
84540
5.INSPECT PARK/NEUTRAL POSITION SWITCH
51442C
6.INSTALL ENGINE UNDER COVER LH (w/o Metal Type Under Cover)
51405A
7.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Metal Type Under Cover)
51451A
8.INSTALL CENTER ENGINE UNDER COVER (w/ Metal Type Under Cover)