Home › Drivetrain › CLUTCH › CLUTCH PEDAL(for RHD) › 2013.08–2017.10
RM30M0E _52 Drivetrain _017089 CLUTCH _0091163 CLUTCH PEDAL(for RHD) A

CLUTCH  CLUTCH PEDAL(for RHD)  REMOVAL  


PROCEDURE

Hide 1.PLACE FRONT WHEELS FACING STRAIGHT AHEAD

Hide 55606 3.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 55432B 4.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL

Hide 45259A 5.REMOVE COLUMN HOLE COVER SILENCER SHEET

Hide 45209 6.DISCONNECT STEERING SLIDING YOKE SUB-ASSEMBLY

Hide 31301A 7.REMOVE CLUTCH PEDAL SPRING

a.
C283229

Remove the clutch pedal spring from the clutch pedal support sub-assembly and clutch pedal sub-assembly.


Hide 31453 8.DISCONNECT CLUTCH MASTER CYLINDER PUSH ROD CLEVIS

a.
C235126

Remove the clip from the push rod clevis pin.


b.

Remove the push rod clevis pin and disconnect the clutch master cylinder push rod clevis from the clutch pedal sub-assembly.


Hide 55107A 9.REMOVE CLUTCH PEDAL SUPPORT SUB-ASSEMBLY

a.
C283230

Disconnect the connector from the clutch start switch assembly.


b.

Disengage the clamp from the clutch pedal support sub-assembly.


c.

Remove the 2 bolts, 2 nuts and clutch pedal support sub-assembly from the body and clutch master cylinder assembly.


Hide 84520 10.REMOVE CLUTCH START SWITCH ASSEMBLY

a.
C235128

Remove the nut and clutch start switch assembly from the clutch pedal support sub-assembly.

NOTICE:

To prevent damage to the clutch start switch assembly, make sure not to rotate it during removal.



Hide 31301F 11.REMOVE CLUTCH PEDAL STOPPER BOLT

a.
C235129

Loosen the lock nut and remove the clutch pedal stopper bolt from the clutch pedal support sub-assembly.


Hide 31301 12.REMOVE CLUTCH PEDAL SUB-ASSEMBLY

a.
C235130

Remove the bolt, nut and clutch pedal sub-assembly from the clutch pedal support sub-assembly.

HINT:

Turn the nut while holding the bolt.



Hide 31324A 13.REMOVE CLUTCH PEDAL SHAFT COLLAR

a.
C235131C01
0.479,1.844 0.479,1.51 false 1.271,1.635 1.271,1.302 false 3.063,1.188 3.063,0.854 false 0.417,1.854 0.729,2.01 0.313,0.156 10 false *1 1.219,1.656 1.531,1.813 0.313,0.156 10 false *2 3.01,1.208 3.323,1.365 0.313,0.156 10 false *1
*1 Clutch Pedal Spring Bush
*2 Clutch Pedal Shaft Collar


Remove the 2 clutch pedal spring bushes and clutch pedal shaft collar from the clutch pedal sub-assembly.


Hide 31301B 14.REMOVE NO. 1 CLUTCH PEDAL CUSHION

a.
C261203

Remove the No. 1 clutch pedal cushion from the clutch pedal sub-assembly.


Hide 31301C 15.REMOVE CLUTCH PEDAL BUSH

a.
C289093

Secure the clutch pedal sub-assembly in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.

Using an 8 mm hexagon socket wrench and hammer, remove the clutch pedal bush from the clutch pedal sub-assembly.


Hide 31322 16.REMOVE CLUTCH PEDAL STOPPER

a.
C264619

Remove the clutch pedal stopper from the clutch pedal sub-assembly.


Hide 31321 17.REMOVE CLUTCH PEDAL PAD

a.
C264620

Remove the clutch pedal pad from the clutch pedal sub-assembly.