Home › Engine / Hybrid System › 1NZ-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE › 2013.08–2016.10
RM30M0E _51 Engine / Hybrid System _017071 1NZ-FE ENGINE CONTROL _0091205 CAMSHAFT OIL CONTROL VALVE A

1NZ-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  REMOVAL  


PROCEDURE

Hide 16361A 1.REMOVE FAN AND GENERATOR V BELT

Hide 11212 2.REMOVE NO. 2 CYLINDER HEAD COVER

a.
A111172

Remove the 4 nuts and No. 2 cylinder head cover from the cylinder head cover sub-assembly and intake manifold.


Hide 16381 3.REMOVE FAN BELT ADJUSTING BAR

Hide 11101J 4.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.
A171169

Disconnect the camshaft timing oil control valve assembly connector.


b.

Remove the bolt and camshaft timing oil control valve assembly from the cylinder head sub-assembly.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace the camshaft timing oil control valve assembly.



c.

Remove the O-ring from the camshaft timing oil control valve assembly.