89661
1.INSTALL ECM (for Automatic Transaxle)
Engage the 3 guides to install the ECM to the ECM bracket.
Install the ECM with ECM bracket to the vehicle with the 2 nuts.
If a component has been dropped or subjected to a strong impact, replace the ECM.
Engage the clamp to connect the wire harness to the ECM bracket.
Connect the 4 ECM connectors.
89661
2.INSTALL ECM (for Manual Transaxle)
Engage the 3 guides to install the ECM to the ECM bracket.
Install the ECM with ECM bracket to the vehicle with the 2 nuts.
If a component has been dropped or subjected to a strong impact, replace the ECM.
Engage the clamp to connect the wire harness to the ECM bracket.
Connect the 3 ECM connectors.
55550
3.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY