Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY › 2013.08–2014.03
RM30M0E _58 Vehicle Interior _017116 SEAT _0092019 FRONT SEAT ASSEMBLY A

SEAT  FRONT SEAT ASSEMBLY  REASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

The procedure described below is for the LHD side. Use the same procedure for both the LHD and RHD side, unless otherwise specified.

·

The procedure described below is for the driver side. Use the same procedure for both the driver and front passenger sides, unless otherwise specified.



PROCEDURE

Hide 1.INSTALL SEAT ADJUSTER COVER CAP

a.

Install the 2 seat adjuster cover caps.


Hide 72211C 2.INSTALL SEAT TRACK ADJUSTING HANDLE

a.
B347013

Engage the 2 springs to install the seat track adjusting handle to the separate type front seat cushion spring assembly LH.


Hide 71014S 3.INSTALL FRONT SEATBACK FRAME SUB-ASSEMBLY LH

a.
B347012

Install the front seatback frame sub-assembly LH to the separate type front seat cushion spring assembly LH with the 4 bolts.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 71874A 4.INSTALL FRONT SEAT LOWER CUSHION SHIELD (w/ Vertical Adjuster)

a.
B347014

Engage the 2 claws to install the front seat lower cushion shield.


Hide 71874 5.INSTALL FRONT SEAT LOWER CUSHION SHIELD LH (w/ Vertical Adjuster)

a.
B347020

Engage the clip to install the front seat lower cushion shield LH.


b.

Engage the hook as shown in the illustration.


c.

Install the screw.


Hide 71873 6.INSTALL FRONT SEAT LOWER CUSHION SHIELD RH (w/ Vertical Adjuster)

HINT:

Use the same procedure as for the LH side.


Hide 71538A 7.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH

a.
B347010

Engage the 2 guides to install the front seat cushion edge protector LH.


Hide 71537G 8.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH

HINT:

Use the same procedure as for the LH side.


Hide 71074S 9.INSTALL SEPARATE TYPE FRONT SEATBACK COVER

a.
B359992C03
0.51,3.115 0.417,2.969 false 1.823,4.344 1.833,4.167 false 0.24,2.875 0.552,3.073 0.313,0.198 10 false *1 1.75,4.365 2.063,4.563 0.313,0.198 10 false *a
*1 Hog Ring
*a Hog Ring Pliers


Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 6 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seatback cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.

·

Align the center of the hog ring installation area of the separate type front seatback cover with the center of the separate type front seatback pad so that no wrinkles appear, and securely tighten the hog rings as shown in the illustration.




Hide 10.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

a.
B347008

Install the separate type front seatback cover with pad to the front seatback frame sub-assembly LH.


b.
B343453C01
0.698,0.854 0.719,1.01 false 2.927,1.375 2.875,1.542 false 0.656,1 0.969,1.156 0.313,0.156 10 false *a 2.792,1.521 3.104,1.677 0.313,0.156 10 false *a
*a Protruding


Align the protruding portion of the front seat headrest support with the installation groove of the front seatback frame sub-assembly LH.


c.

Engage the 4 claws to install the 2 front seat headrest supports.


d.
B358378C01
0.885,2.969 1.031,3.073 false 1.698,4.156 1.75,3.948 false 1.042,3.094 1.354,3.292 0.313,0.198 10 false *1 1.604,4.208 1.917,4.406 0.313,0.198 10 false *a
*1 Hog Ring
*a Hog Ring Pliers


Using hog ring pliers, install 3 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seatback cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.

·

Securely tighten the hog rings as shown in the illustration.




e.
B359991C02
0.813,3.125 1.042,3.281 true 1.854,4.177 1.844,4.354 false 1.063,3.292 1.375,3.49 0.313,0.198 10 false *1 1.75,4.365 2.063,4.563 0.313,0.198 10 false *a
*1 Hog Ring
*a Hog Ring Pliers


Using hog ring pliers, install 4 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seatback cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.

·

Securely tighten the hog rings as shown in the illustration.




Hide 71072S 11.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

a.
B343458C03
0.604,3.146 0.458,3.031 false 1.885,4.385 1.875,4.188 false 0.292,2.948 0.604,3.146 0.313,0.198 10 false *1 1.823,4.406 2.135,4.604 0.313,0.198 10 false *a
*1 Hog Ring
*a Hog Ring Pliers


Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 16 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seat cushion cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.

·

Align the center of the hog ring installation area of the separate type front seat cushion cover with the center of the separate type front seat cushion pad so that no wrinkles appear, and securely tighten the hog rings as shown in the illustration.




b.
B359989C02
0.823,3.063 0.958,3.177 true 1.865,3.969 1.76,4.177 false 0.979,3.198 1.292,3.396 0.313,0.198 10 false *1 1.667,4.208 1.979,4.406 0.313,0.198 10 false *a
*1 Hog Ring
*a Hog Ring Pliers


Using hog ring pliers, install 2 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seat cushion cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.

·

Tighten the hog rings as shown in the illustration.




Hide 12.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

a.
B347003

Place the separate type front seat cushion cover with pad to the separate type front seat cushion spring assembly LH.


b.

Engage the 2 hooks.


c.

Engage the 5 hooks.

B347002


d.
B347001

Engage the 3 hooks to install the separate type front seat cushion cover with pad.


e.

for Front Passenger Side:

i.
B361096

Engage the 4 hooks



Hide 71862 13.INSTALL FRONT SEAT CUSHION INNER SHIELD

a.
B347000

Engage the claw and 3 guides to install the front seat cushion inner shield.


Hide 71812D 14.INSTALL FRONT SEAT CUSHION SHIELD LH

a.
B346999

Engage the claw, 3 guides and 2 clips to install the front seat cushion shield LH.


Hide 72495 15.INSTALL VERTICAL ADJUSTING HANDLE (w/ Vertical Adjuster)

a.
B346998

Install the vertical adjusting handle with the screw.


Hide 72526A 16.INSTALL RECLINING ADJUSTER RELEASE HANDLE

B347018

a.

Engage the claw to install the reclining adjuster release handle.


Hide 73240 17.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

Hide 73230 18.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

Hide 71910A 19.INSTALL FRONT SEAT HEADREST ASSEMBLY

a.

Install the front seat headrest assembly.