Home › Engine / Hybrid System › 2NZ-FE FUEL › FUEL PRESSURE REGULATOR › 2013.08–2016.10
RM30M0E _51 Engine / Hybrid System _017076 2NZ-FE FUEL _0092329 FUEL PRESSURE REGULATOR A

2NZ-FE FUEL  FUEL PRESSURE REGULATOR  INSTALLATION  


PROCEDURE

Hide 23280J 1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

a.

Apply gasoline to a new O-ring and install it to the fuel pressure regulator assembly.

NOTICE:

Do not twist the O-ring.



b.
A248199

Install the fuel pressure regulator assembly to the No. 1 fuel suction support.


Hide 77175 2.INSTALL NO. 2 FUEL SUCTION SUPPORT

a.

Engage the 3 claws and clamp to install the No. 2 fuel suction support to the No. 1 fuel suction support.


Hide 77174 3.INSTALL NO. 1 FUEL SUCTION SUPPORT

a.

Apply gasoline to a new O-ring and install it to the fuel suction tube assembly.


b.
A300022

Engage the 5 claws to install the No. 1 fuel suction support to the fuel suction tube assembly.


Hide 23221 4.INSTALL FUEL PUMP

Hide 77785 5.INSTALL FUEL PUMP HARNESS

Hide 83320 6.INSTALL FUEL SENDER GAUGE ASSEMBLY

Hide 77020A 7.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY