Use the same procedure for the LH and RH sides.
The procedure described below is for the LH side.
68230C
1.REMOVE REAR DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY
75762A
2.REMOVE REAR DOOR WINDOW FRAME FRONT MOULDING
Using an infrared light, heat the rear door window frame front moulding.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
Do not burn yourself with the heated vehicle body or infrared light.
Do not heat the vehicle body excessively.
Remove any tape remaining on the vehicle body.
| *a | Double-sided Tape |
Disengage the 2 clips and pull out the rear door window frame front moulding while peeling off the double-sided tape.