Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
75762A
1.REMOVE REAR DOOR WINDOW FRAME FRONT MOULDING
68124B
2.REMOVE REAR DOOR QUARTER WINDOW GLASS
75924
3.REMOVE NO. 2 BLACK OUT TAPE
Using an infrared light, heat the No. 2 black out tape.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
Do not burn yourself on the hot vehicle body or with the infrared light.
Do not heat the vehicle body excessively.
Lift the end portion with your fingernail and peel it parallel to the attachment surface.