Home › Vehicle Interior › SEAT BELT › CHILD RESTRAINT SEAT ANCHOR BRACKET(for Sedan) › 2013.08–2017.10
RM30M0E _58 Vehicle Interior _017117 SEAT BELT _0092584 CHILD RESTRAINT SEAT ANCHOR BRACKET(for Sedan) A

SEAT BELT  CHILD RESTRAINT SEAT ANCHOR BRACKET(for Sedan)  INSTALLATION  


PROCEDURE

Hide 73707 1.INSTALL CHILD RESTRAINT SEAT ANCHOR INNER BRACKET SUB-ASSEMBLY

a.

Temporarily install the child restraint seat anchor inner bracket sub-assembly with the center bolt.


b.

Install the 2 bolts and tighten the center bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73528 2.INSTALL REAR SEAT SUB REAR FLOOR CARPET (for Separate Seat Type)

a.

Install the rear seat sub floor carpet with the 2 clips.


Hide 64272B 3.INSTALL ROOM PARTITION BOARD LH (for Separate Seat Type)

a.

Engage the clip to install the room partition board LH.


b.

Install the clip.


Hide 64271G 4.INSTALL ROOM PARTITION BOARD RH (for Separate Seat Type)

HINT:

Use the same procedure as for the LH side.


Hide 64274 5.INSTALL NO. 1 ROOM PARTITION TRIM PAD (for Separate Seat Type)

a.

Engage the 7 claws and 2 guides to install the No. 1 room partition trim pad.


Hide 64271E 6.INSTALL ROOM PARTITION PANEL (for Fixed Seat Type)

HINT:

Use the same procedure for both sides.


a.

Engage the 2 guides to install the room partition panel with the 2 bolts.

Torque:
7.9 N*m (81 kgf*cm, 70 in.*lbf)


Hide 64330D 7.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

a.

Engage the 5 guides to install the package tray trim panel assembly.


b.

for Fixed Seat Type:

i.

Install the 3 clips.



c.

for Separate Seat Type:

i.

Install the 4 clips.



Hide 62472A 8.INSTALL ROOF SIDE INNER GARNISH LH

Hide 62471A 9.INSTALL ROOF SIDE INNER GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 62552F 10.INSTALL REAR SEAT SIDE GARNISH LH

Hide 62551F 11.INSTALL REAR SEAT SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 73370 12.CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

a.

Engage the 2 claws to connect the floor anchor of the rear seat 3 point type outer belt assembly LH.


b.

Install the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73360 13.CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 62332A 14.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

a.

Connect the rear door opening trim weatherstrip LH.


Hide 62331A 15.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure as for the LH side.


Hide 16.INSTALL REAR SEAT ASSEMBLY (for Fixed Seat Type)

Hide 17.INSTALL REAR SEAT ASSEMBLY (for Separate Seat Type)