Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER SWITCH › 2013.08–2017.10
RM30M0E _59 Vehicle Exterior _017121 WINDOW / GLASS _0092748 WINDOW DEFOGGER SWITCH A

WINDOW / GLASS  WINDOW DEFOGGER SWITCH  INSTALLATION  


PROCEDURE

Hide 55909C 1.INSTALL AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY

a.
I110011

Engage the claw.


b.
I110012

Pull out the inner cable from the outer cable, and pass it through the outer clamp case.


c.
I110013

Insert the outer cable into the outer clamp case.

NOTICE:

Check that a clicking sound can be heard.



Hide 55908A 2.INSTALL AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY

a.
I109872

Engage the claw.


b.
I109873

Pull out the inner cable from the outer cable, and pass it through the outer clamp case.


c.
I109874

Insert the outer cable into the outer clamp case.

NOTICE:

Check that a clicking sound can be heard.



Hide 55906A 3.INSTALL DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY

a.
I109875

Engage the claw.


b.
I109876

Pull out the inner cable from the outer cable, and pass it through the outer clamp case.


c.
I109877

Insert the outer cable into the outer clamp case.

NOTICE:

Check that a clicking sound can be heard.



Hide 55900A 4.INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY

a.

Engage the claw and install the cable ring to the air mix damper control link.


b.

Engage the clamp and install the air mix damper control cable sub-assembly.


c.

Engage the claw and install the cable ring to the defroster damper control link.


d.

Engage the clamp and install the defroster damper control cable sub-assembly.


e.

Engage the claw and install the cable ring to the air inlet damper control link.


f.

Engage the clamp and install the air inlet damper control cable sub-assembly.


g.

Engage the 4 claws and install the heater control and accessory assembly.


Hide 55902C 5.INSTALL AIR CONDITIONING PANEL SUB-ASSEMBLY

a.

Engage the 5 clips and install the air conditioning panel sub-assembly.


Hide 55550 6.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

Hide 55432B 7.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for LHD)

Hide 55432B 8.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)

Hide 55606 9.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY