Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL(for LHD)
RM30M0E _54 Brake _017099 BRAKE SYSTEM (OTHER) _0092756 BRAKE PEDAL(for LHD) N

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(for LHD)  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT AND ADJUST BRAKE PEDAL

a.

Inspect the brake pedal height.

i.

Turn back the carpet.


ii.

Measure the shortest distance between the brake pedal pad surface and floor panel.

C286090C01
4.573,2.313 4.885,2.469 0.313,0.156 10 false *a
*a Brake Pedal Height - -
V100144

Measuring Plane - -


Brake pedal height from floor panel:

144 to 154 mm (5.67 to 6.06 in.)


If the brake pedal height is incorrect, adjust the brake pedal height according to the procedure below.



b.

Adjust the brake pedal height.

i.

Turn back the carpet.


ii.
C234476C01
1.302,1.927 1.51,1.521 false 1.563,1.552 1.479,2.313 false 2.302,0.813 2.583,0.625 false 2.625,0.51 2.792,0.667 0.167,0.156 10 false *1 1.219,1.948 1.385,2.104 0.167,0.156 10 false *2 1.406,2.333 1.573,2.49 0.167,0.156 10 false *3 2.385,3.74 2.552,3.896 0.167,0.156 10 false *a
*1 Stop Light Switch Assembly
*2 Push Rod
*3 Clevis Lock Nut
*a Brake Pedal Height from Floor Panel


Remove the stop light switch assembly.

Click hereVehicle Exterior>LIGHTING (EXT)>STOP LIGHT SWITCH>REMOVAL


iii.

Loosen the clevis lock nut.


iv.

Adjust the brake pedal height by turning the push rod.

Brake pedal height from floor panel:

144 to 154 mm (5.67 to 6.06 in.)



v.

Tighten the clevis lock nut.

Torque:
26 N*m (265 kgf*cm, 19 ft.*lbf)


vi.

Install the stop light switch assembly.

Click hereVehicle Exterior>LIGHTING (EXT)>STOP LIGHT SWITCH>INSTALLATION



Hide 2.INSPECT BRAKE PEDAL FREE PLAY

a.
C132708C08
2.177,1.542 2.781,1.885 0.604,0.344 10 *a
*a Brake Pedal Free Play


Inspect the brake pedal free play.

i.

Stop the engine and depress the brake pedal several times until there is no vacuum left in the booster.


ii.

Depress the pedal until a slight resistance is felt. Measure the distance as shown in the illustration.

Brake pedal free play:

1.0 to 6.0 mm (0.0394 to 0.236 in.)


If the brake pedal free play is not as specified, check the clearance of the stop light switch assembly.



Hide 3.INSPECT BRAKE PEDAL RESERVE DISTANCE

a.

Inspect the brake pedal reserve distance.

i.

Turn back the carpet.


ii.

Lock the wheels with chocks to secure the vehicle.


iii.

Release the parking brake.


iv.

With the engine running, depress the brake pedal and measure the brake pedal reserve distance as shown in the illustration.

C286090C02
4.51,2.323 4.823,2.479 0.313,0.156 10 false *a
*a Reserve Distance - -
V100144

Measuring Plane - -


Brake pedal reserve distance from floor panel at 300 N (31 kgf, 67.4 lbf):
for Rear drum brake w/ ABS:

More than 87 mm (3.43 in.)

for Rear drum brake w/o ABS:

More than 91 mm (3.58 in.)

for Rear disc brake:

More than 92 mm (3.62 in.)


If the distance is not as specified, troubleshoot the brake system.