Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL(for LHD) › 2013.08–2017.10
RM30M0E _54 Brake _017099 BRAKE SYSTEM (OTHER) _0092756 BRAKE PEDAL(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(for LHD)  REMOVAL  


PROCEDURE

Hide 55606 1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 55432B 2.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL

Hide 55411G 3.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL

Hide 45259A 4.REMOVE COLUMN HOLE COVER SILENCER SHEET

Hide 45209 5.SEPARATE STEERING SLIDING YOKE SUB-ASSEMBLY

Hide 84340 6.REMOVE STOP LIGHT SWITCH ASSEMBLY

Hide 84345 7.REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

a.
C171562

Remove the stop light switch mounting adjuster from the brake pedal support sub-assembly.


Hide 8.SEPARATE WIRE HARNESS

a.
C286086

Disengage the wire harness clamp.


Hide 47101A 9.REMOVE BRAKE PEDAL RETURN SPRING

a.
C293133

Remove the brake pedal return spring from the brake pedal support sub-assembly and push rod pin.


Hide 47264D 10.SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS

a.
C293132

Remove the clip and push rod pin to separate the brake master cylinder push rod clevis from the brake pedal sub-assembly.


Hide 55106 11.REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY

a.
C286088

Remove the bolt to separate the brake pedal support sub-assembly from the instrument panel reinforcement.


b.
C286087

Remove the 4 nuts and brake pedal support sub-assembly from the body.