47150
1.INSTALL PROPORTIONING VALVE ASSEMBLY
Install the proportioning valve assembly to the proportioning valve bracket with the 2 nuts.
Using a 10 mm union nut wrench, install the 3 brake tubes to the proportioning valve assembly and brake tube way with the 6 union nuts.
Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
Install the proportioning valve bracket with the proportioning valve assembly with the 2 bolts in the order shown in the illustration.
Using a 10 mm union nut wrench, connect the 6 brake tubes to the proportioning valve assembly and brake tube way.
Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
74410
2.INSTALL BATTERY CARRIER ASSEMBLY
74431
3.INSTALL BATTERY TRAY
28800
4.INSTALL BATTERY
5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6.BLEED BRAKE LINE