55606
1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55432B
2.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL
55411G
3.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL
84340
4.REMOVE STOP LIGHT SWITCH ASSEMBLY
84345
5.REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER
Remove the stop light switch mounting adjuster from the brake pedal support sub-assembly.
6.SEPARATE WIRE HARNESS
Disengage the 2 wire harness clamps.
Disconnect the accelerator pedal sensor assembly connector.
47101A
7.REMOVE BRAKE PEDAL RETURN SPRING
Remove the brake pedal return spring from the brake pedal support sub-assembly and push rod pin.
47264D
8.SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS
Remove the clip and push rod pin to separate the brake master cylinder push rod clevis from the brake pedal sub-assembly.
55106
9.REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY
Remove the bolt to separate the brake pedal support sub-assembly from the instrument panel reinforcement.
Remove the 4 nuts and brake pedal support sub-assembly from the body.