Home › Brake › PARKING BRAKE › PARKING BRAKE LEVER › 2013.08–2014.03
RM30M0E _54 Brake _017102 PARKING BRAKE _0092772 PARKING BRAKE LEVER A

PARKING BRAKE  PARKING BRAKE LEVER  INSTALLATION  


PROCEDURE

Hide 84550 1.INSTALL PARKING BRAKE SWITCH ASSEMBLY

a.

Install the parking brake switch assembly to the parking brake lever sub-assembly with the screw.

Torque:
0.9 N*m (9 kgf*cm, 8 in.*lbf)


Hide 46201E 2.INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY

a.
C282408C01
0.813,1.146 1.365,1.365 0.552,0.219 10 true 1 (*a), 5 2.479,1.219 3.031,1.438 0.552,0.219 10 true 2 (*a), 6 2.25,0.542 2.438,0.719 0.188,0.177 10 true 3 1.177,0.333 1.323,0.51 0.146,0.177 10 true 4
*a Temporarily Tighten


Install the parking brake lever sub-assembly and No. 3 console box mounting bracket to the body with the 4 bolts in the sequence shown in the illustration.

Torque:
14.5 N*m (148 kgf*cm, 11 ft.*lbf)


b.

Engage the claw and 2 guides to install the parking brake cable end stopper to the parking brake equalizer.


c.

Connect the No. 2 parking brake cable assembly and No. 3 parking brake cable assembly to the parking brake equalizer.


d.

Connect the parking brake switch assembly connector.


Hide 58995A 3.INSTALL NO. 1 CONSOLE BOX MOUNTING BRACKET

a.

Install the No. 1 console box mounting bracket to the No. 3 console box mounting bracket and body with the 3 bolts.


Hide 4.ADJUST PARKING BRAKE LEVER TRAVEL