Home › Vehicle Interior › SEAT BELT › CHILD RESTRAINT SEAT ANCHOR BRACKET(for Hatchback) › 2014.03–2017.10
RM30M0E _58 Vehicle Interior _017117 SEAT BELT _0116467 CHILD RESTRAINT SEAT ANCHOR BRACKET(for Hatchback) A

SEAT BELT  CHILD RESTRAINT SEAT ANCHOR BRACKET(for Hatchback)  INSTALLATION  


PROCEDURE

Hide 73707 1.INSTALL CHILD RESTRAINT SEAT ANCHOR INNER BRACKET SUB-ASSEMBLY

a.

Temporarily install the child restraint seat anchor inner bracket sub-assembly with the center bolt.


b.

Install the 2 bolts and tighten the center bolts.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73528 2.INSTALL REAR SEAT REAR SUB FLOOR CARPET

a.

Install the rear seat rear sub floor carpet with the 2 clips.


Hide 62551F 4.INSTALL REAR SEAT SIDE GARNISH RH

HINT:

Use the same procedure as for the RH side.


Hide 73370 5.CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

a.

Engage the 2 claws to connect the floor anchor of the rear seat 3 point type outer belt assembly LH.


b.

Install the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73360 6.CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 64740C 7.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

Hide 64730B 8.INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 62332A 9.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

a.

Connect the rear door opening trim weatherstrip RH.


Hide 62331A 10.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure as for the RH side.


Hide 11.INSTALL REAR SEAT ASSEMBLY (for Fold Down Seat Type)

Hide 12.INSTALL REAR SEAT ASSEMBLY (for Separate Seat Type)

Hide 64773B 14.INSTALL NO. 2 SPARE WHEEL COVER PAD

Hide 64711E 17.INSTALL LUGGAGE COMPARTMENT FLOOR MAT

Hide 64330 18.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY