Use the same procedure for the LH and RH sides.
The procedure described below is for the LH side.
1.REMOVE FRONT BUMPER ASSEMBLY
81150
2.REMOVE HEADLIGHT ASSEMBLY
| *1 | Radiator Support Cushion |
Remove the screw and bolt.
Remove the radiator support cushion.
Disengage the claw to separate the headlight assembly.
w/o Projector Headlight:
Disconnect the 3 connectors to remove the headlight assembly.
w/ Projector Headlight:
Disconnect the 3 connectors to remove the headlight assembly.