Use the same procedure for the LH and RH sides.
The procedure described below is for the LH side.
81560
1.INSTALL REAR COMBINATION LIGHT ASSEMBLY
Pass the connector through the hole to the inside of the vehicle and install the grommet of the rear combination light socket and wire sub-assembly.
Engage the 2 guides and 2 pins to install the rear combination light assembly.
Install the 2 screws.
Connect the connector.
64740C
2.INSTALL DECK TRIM SIDE PANEL ASSEMBLY
64716D
3.INSTALL REAR DECK TRIM COVER
64773B
4.INSTALL NO. 2 SPARE WHEEL COVER PAD
64772
5.INSTALL SPARE WHEEL COVER PAD
58410B
6.INSTALL DECK BOARD ASSEMBLY
64711E
7.INSTALL LUGGAGE COMPARTMENT FLOOR MAT
64330
8.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY