Use the same procedure for the LH and RH sides.
The procedure described below is for the LH side.
The license plate light bulb can be replaced by removing only the license plate light lens. It is not necessary to remove the license plate light assembly.
76801A
1.REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
81270
2.REMOVE LICENSE PLATE LIGHT ASSEMBLY
Disconnect the connector.
Disengage the 2 claws and remove the license plate light assembly.
81274B
3.REMOVE LICENSE PLATE LIGHT PACKING
81271
4.REMOVE LICENSE PLATE LIGHT LENS
81270B
5.REMOVE LICENSE PLATE LIGHT BULB