52021
1.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY (for LHD)
Install the front bumper reinforcement sub-assembly with the 5 nuts.
Engage the 4 clamps to install the wire harness.
52021
2.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY (for RHD)
Install the front bumper reinforcement sub-assembly with the 5 nuts.
Engage the 3 clamps to install the wire harness.
53288B
3.INSTALL RADIATOR SUPPORT EXTENSION LH
Engage the 2 claws to install the radiator support extension LH.
Install the clip.
53287B
4.INSTALL RADIATOR SUPPORT EXTENSION RH
Use the same procedure as for the LH side.
52611
5.INSTALL FRONT BUMPER ENERGY ABSORBER (w/ Energy Absorber)
Engage the 2 guides to install the front bumper energy absorber.
53286B
6.INSTALL NO. 2 RADIATOR SIDE AIR SEAL (w/ Energy Absorber)
Engage the 2 claws to install the No. 2 radiator side air seal.
Install the clip.
Engage the clamp to install the wire harness.
Connect the connector.
53285B
7.INSTALL NO. 1 RADIATOR SIDE AIR SEAL (w/ Energy Absorber)
Use the same procedure as for the No. 2 radiator side air seal side.
53286B
8.INSTALL NO. 2 RADIATOR SIDE AIR SEAL (w/o Energy Absorber)
Engage the 3 claws to install the No. 2 radiator side air seal.
Install the clip.
Engage the clamp to install the wire harness.
Connect the connector.
53285B
9.INSTALL NO. 1 RADIATOR SIDE AIR SEAL (w/o Energy Absorber)
Use the same procedure as for the No. 2 radiator side air seal side.
88790B
10.INSTALL THERMISTOR ASSEMBLY (for Automatic Air Conditioning System)
88891H
11.INSTALL NO. 1 COOLER COVER (w/ No. 1 Cooler Cover)
Engage the 2 guides to install the No. 1 cooler cover.
Install the 2 clips.
52536
12.INSTALL FRONT BUMPER SIDE RETAINER LH
Engage the claw to install the front bumper side retainer LH.
Install the bolt.
52535
13.INSTALL FRONT BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
52128B
14.INSTALL FRONT BUMPER HOLE COVER LH
Engage the 4 claws to install the front bumper hole cover LH.
52127D
15.INSTALL FRONT BUMPER HOLE COVER RH
Use the same procedure as for the LH side.
81440B
16.INSTALL DAYTIME RUNNING LIGHT ASSEMBLY LH (w/ Daytime Running Light)
Engage the guide and install the daytime running light assembly LH.
Install the 2 screws.
81430C
17.INSTALL DAYTIME RUNNING LIGHT ASSEMBLY RH (w/ Daytime Running Light)
Use the same procedure as for the LH side.
81220
18.INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)
Engage the guide and install the fog light assembly LH.
Install the 2 screws.
81210A
19.INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Use the same procedure as for the LH side.
53112E
20.INSTALL LOWER NO. 1 RADIATOR GRILLE
Engage the 20 claws to install the lower No. 1 radiator grille.
Install the 2 screws.
52127C
21.INSTALL FRONT BUMPER HOLE COVER
| *a | Claw A |
Engage the claw A.
Engage the 4 claws and guide to install the front bumper hole cover.
53111E
22.INSTALL RADIATOR GRILLE MOULDING LH
Engage the 3 claws to install the radiator grille moulding LH.
53111D
23.INSTALL RADIATOR GRILLE MOULDING RH
Use the same procedure as for the LH side.
53124E
24.INSTALL LOWER RADIATOR GRILLE MOULDING LH
Engage the 2 claws to install the lower radiator grille moulding LH.
53123E
25.INSTALL LOWER RADIATOR GRILLE MOULDING RH
Use the same procedure as for the LH side.
53124C
26.INSTALL UPPER RADIATOR GRILLE MOULDING LH
Engage the 2 claws to install the upper radiator grille moulding LH.
53121F
27.INSTALL UPPER RADIATOR GRILLE MOULDING RH
Use the same procedure as for the LH side.
28.INSTALL RADIATOR GRILLE EMBLEM
Engage the 4 claws and 2 guides to install the radiator grille emblem.
29.INSTALL GROMMET
Install the 4 grommets.
30.INSTALL CLIP (w/ Front Spoiler)
Install the 2 clips.
Use the same procedure for the RH side and LH side.
53879A
31.INSTALL FRONT FENDER LINER RETAINER
Install the front fender liner retainer.
Use the same procedure for the RH side and LH side.
52521A
32.INSTALL FRONT BUMPER RETAINER CLIP
Install the front bumper retainer clip.
Use the same procedure for the RH side and LH side.
76852A
33.INSTALL FRONT SPOILER COVER LH (w/ Front Spoiler)
76851A
34.INSTALL FRONT SPOILER COVER RH (w/ Front Spoiler)
Use the same procedure as for the LH side.