55606
1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55432B
2.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (for 1NR-FE, 2NR-FE)
for LHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL
for RHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL
89650
3.REMOVE POWER STEERING ECU ASSEMBLY (for 1NZ-FE, 2NZ-FE)
Disconnect the 4 connectors.
Remove the 2 nuts and power steering ECU assembly from the steering column assembly.
89650
4.REMOVE POWER STEERING ECU ASSEMBLY (for 1NR-FE, 2NR-FE)
Disconnect the 4 connectors.
Disengage the 2 clamps to separate the wire harness from the power steering ECU assembly.
Remove the 2 nuts and power steering ECU assembly from the instrument panel reinforcement assembly.