Home › Drivetrain › K411 CVT › OIL COOLER › from 2016.04
RM30M0E _52 Drivetrain _052750 K411 CVT _0259919 OIL COOLER A

K411 CVT  OIL COOLER  REMOVAL  


PROCEDURE

Hide 51442C 1.REMOVE ENGINE UNDER COVER LH (w/o Metal Type Under Cover)

Hide 51451A 2.REMOVE CENTER ENGINE UNDER COVER (w/ Metal Type Under Cover)

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Metal Type Under Cover)

Hide 5.DRAIN CONTINUOUSLY VARIABLE TRANSAXLE FLUID

Hide 16260 6.DISCONNECT WATER BY-PASS HOSE ASSEMBLY

a.
C288546

Slide the 2 hose clips and disconnect the 2 water by-pass hoses from the transmission oil cooler.


Hide 33493C 7.REMOVE TRANSMISSION OIL COOLER

a.
C288548

Remove the 3 bolts and transmission oil cooler from the continuously variable transaxle assembly.


b.

Remove the 2 O-rings from the transmission oil cooler.