Home › Engine / Hybrid System › 1NR-FE COOLING › THERMOSTAT › from 2016.04
RM30M0E _51 Engine / Hybrid System _053564 1NR-FE COOLING _0259959 THERMOSTAT A

1NR-FE COOLING  THERMOSTAT  REMOVAL  


PROCEDURE

Hide 27060 2.REMOVE GENERATOR WITH REGULATOR ASSEMBLY

Hide 17168 3.REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

Hide 16268 4.DISCONNECT NO. 1 WATER BY-PASS PIPE

a.
A378244

Remove the bolt and disconnect the No. 1 water by-pass pipe from the cylinder block sub-assembly.


b.

Slide the hose clip and disconnect the No. 1 water by-pass hose together with the No. 1 water by-pass pipe from the water inlet with thermostat sub-assembly.


Hide 16572D 5.DISCONNECT NO. 2 RADIATOR HOSE

a.
A378245

Slide the hose clip and disconnect the No. 2 radiator hose from the water inlet with thermostat sub-assembly.


Hide 16321 6.REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

a.
A379895

Remove the 3 bolts and water inlet with thermostat sub-assembly from the timing chain cover assembly.


Hide 16326 7.REMOVE NO. 2 WATER INLET HOUSING GASKET

a.
A383263C02
1.01,0.906 0.75,0.615 true 0.573,0.521 0.885,0.719 0.313,0.198 10 false *1
*1 No. 2 Water Inlet Housing Gasket


Remove the No. 2 water inlet housing gasket from the water inlet with thermostat sub-assembly.