16363
1.INSTALL COOLING FAN MOTOR
Install the cooling fan motor to the fan shroud with the 3 screws.
16361
2.INSTALL FAN
Install the fan to the cooling fan motor with the nut.
16711
3.INSTALL FAN SHROUD
Engage the 3 guides and 2 claws to install the fan shroud to the radiator assembly.
Do not apply any excessive force to the radiator assembly when installing the fan shroud.
Engage the 3 clamps to connect the wire harness to the fan shroud.
Connect the cooling fan motor connector.
4.INSTALL WIRE HARNESS CLAMP BRACKET
Install the wire harness clamp bracket to the cylinder head sub-assembly with the bolt.
Engage the clamp to connect the wire harness to the wire harness clamp bracket.
Engage the 2 clamps to connect the air fuel ratio sensor wire to the wire harness clamp bracket.
Connect the air fuel ratio sensor connector.
16571C
5.CONNECT NO. 1 RADIATOR HOSE
6.CONNECT RADIATOR RESERVOIR TANK HOSE
7.ADD ENGINE COOLANT
8.INSPECT FOR COOLANT LEAK