12204
1.INSTALL PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)
| *1 | PCV Valve (Ventilation Valve Sub-assembly) |
| *2 | Ventilation System Grommet |
Install the PCV valve (ventilation valve sub-assembly) to the ventilation system grommet.
| *a | View A |
| *b | Type A |
| *c | Type B |
| *d | Right Side of Vehicle |
| *e | Front Side of Vehicle |
| *f | Hose Paint Mark |
Connect the ventilation hose to the PCV valve (ventilation valve sub-assembly) and slide the hose clip to secure it.
Perform the installation with the ventilation hose and hose clip at the correct angle.
12611
2.INSTALL NO. 1 ENGINE COVER