Home › Drivetrain › K312 CVT › FRONT DIFFERENTIAL OIL SEAL › from 2016.04
RM30M0E _52 Drivetrain _052969 K312 CVT _0259990 FRONT DIFFERENTIAL OIL SEAL A

K312 CVT  FRONT DIFFERENTIAL OIL SEAL  REPLACEMENT  


PROCEDURE

Hide 1.REMOVE FRONT DRIVE SHAFT ASSEMBLIES

Hide 43420H 2.REMOVE FRONT DRIVE SHAFT OIL SEAL LH

a.
C160542N05
2.219,1.344 2.906,2.24 true 1.198,2.521 1.063,2.896 false 0.948,2.927 1.354,3.135 0.406,0.208 10 false SST 2.823,2.271 3.26,2.5 0.438,0.229 10 false SST

Using SST, remove the front drive shaft oil seal LH from the transaxle case.

SST
09308-00010  

NOTICE:

Do not damage the transaxle case.



Hide 43410M 3.REMOVE FRONT DRIVE SHAFT OIL SEAL RH

a.
C304849N01
1.094,0.635 1.51,0.792 false 2.333,2.01 2.656,1.792 true 0.823,0.563 1.281,0.76 0.458,0.198 10 false SST 2.708,1.719 3.167,1.917 0.458,0.198 10 false SST

Using SST, remove the front drive shaft oil seal RH from the transaxle housing.

SST
09308-00010  

NOTICE:

Do not damage the transaxle housing.



Hide 43410M 4.INSTALL FRONT DRIVE SHAFT OIL SEAL RH

a.

Coat the lip of a new front drive shaft oil seal RH with MP grease.


b.
C304850C01
2.146,0.938 1.917,1.115 1.917,1.115 1.542,0.521 true 1.479,2.552 1.479,2.292 false 1.396,2.917 1.708,3.073 0.313,0.156 10 false *a 1.813,1.146 2.271,1.344 0.458,0.198 10 false SST 1.375,2.583 1.833,2.781 0.458,0.198 10 false SST
*a Depth


Using SST and a hammer, install the front drive shaft oil seal RH to the transaxle housing.

SST
09554-14010  
09950-70010  (09951-07100)

Standard Depth:

1.5 to 2.5 mm (0.0591 to 0.0984 in.)


NOTICE:
·

Be sure to install the front drive shaft oil seal RH in the correct direction.

·

Do not damage the lip of the front drive shaft oil seal RH.




Hide 43420H 5.INSTALL FRONT DRIVE SHAFT OIL SEAL LH

a.

Coat the lip of a new front drive shaft oil seal LH with MP grease.


b.
C269119C05
1.656,1.031 0.479,0.698 0.479,0.698 0.854,1.531 true 1.948,2.729 1.948,2.583 false 0.146,0.604 0.469,0.771 0.323,0.167 10 true SST 1.833,2.75 2.24,2.927 0.406,0.177 10 false SST 1.771,3 2.083,3.198 0.313,0.198 10 false *a
*a Depth


Using SST and a hammer, install the front drive shaft oil seal LH to the transaxle case.

SST
09387-00010  
09950-70010  (09951-07150)

Standard Depth:

6.7 to 7.7 mm (0.264 to 0.303 in.)


NOTICE:
·

Be sure to install the front drive shaft oil seal LH in the correct direction.

·

Do not damage the lip of the front drive shaft oil seal LH.