Home › Engine / Hybrid System › 1NR-FE ENGINE CONTROL › ECM › 2016.04–2016.07
RM30M0E _51 Engine / Hybrid System _053310 1NR-FE ENGINE CONTROL _0260017 ECM A

1NR-FE ENGINE CONTROL  ECM  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 55550 2.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

Hide 89661 3.REMOVE ECM (for CVT)

a.
A382344

Disconnect the 5 ECM connectors.


b.

Disengage the clamp to disconnect the wire harness from the ECM bracket.


c.
A383016

Remove the 2 nuts and ECM with ECM bracket from the vehicle.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace the ECM.



d.
A383017

Disengage the 3 guides to remove the ECM from the ECM bracket.


Hide 89661 4.REMOVE ECM (for Manual Transaxle)

a.
A382343

Disconnect the 4 ECM connectors.


b.

Disengage the clamp to disconnect the wire harness from the ECM bracket.


c.
A179622

Remove the 2 nuts and ECM with ECM bracket from the vehicle.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace the ECM.



d.
A179625

Disengage the 3 guides to remove the ECM from the ECM bracket.