Home › Engine / Hybrid System › 2NR-FE ENGINE CONTROL › CAMSHAFT POSITION SENSOR › from 2016.04
RM30M0E _51 Engine / Hybrid System _053304 2NR-FE ENGINE CONTROL _0260036 CAMSHAFT POSITION SENSOR A

2NR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 11101W 2.REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)

a.
A381912

Disconnect the camshaft position sensor connector.


b.
A381913

Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace the camshaft position sensor.



Hide 11101W 3.REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)

a.
A381914

Disconnect the camshaft position sensor connector.


b.
A381915

Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace the camshaft position sensor.