Home › Engine / Hybrid System › 2NR-FE ENGINE CONTROL › KNOCK SENSOR › from 2016.04
RM30M0E _51 Engine / Hybrid System _053304 2NR-FE ENGINE CONTROL _0260040 KNOCK SENSOR A

2NR-FE ENGINE CONTROL  KNOCK SENSOR  REMOVAL  


PROCEDURE

Hide 89615 2.REMOVE KNOCK SENSOR

a.
A171213

Disconnect the knock sensor connector.


b.

Remove the bolt and knock sensor from the cylinder block sub-assembly.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace the knock sensor.