55781E
1.REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
22030
2.REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY
44774
3.DISCONNECT UNION TO CONNECTOR TUBE HOSE (for CVT)
44774
4.DISCONNECT UNION TO CONNECTOR TUBE HOSE (for Manual Transaxle)
23827A
5.DISCONNECT NO. 2 FUEL VAPOR FEED HOSE
Disconnect the No. 2 fuel vapor feed hose from the intake manifold.
12261
6.DISCONNECT VENTILATION HOSE
Slide the hose clip and disconnect the ventilation hose from the intake manifold.
17111
7.REMOVE INTAKE MANIFOLD (for CVT)
Remove the bolt and vacuum switching valve assembly from the intake manifold.
Disengage the clamp to disconnect the No. 1 air hose from the intake manifold.
Disengage the 4 clamps to disconnect the wire harness from the intake manifold.
Remove the 2 nuts, 3 bolts and intake manifold from the cylinder head sub-assembly.
Remove the No. 1 intake manifold to head gasket from the intake manifold.
17111
8.REMOVE INTAKE MANIFOLD (for Manual Transaxle)
Disengage the 3 clamps to disconnect the wire harness from the intake manifold.
Remove the 2 nuts, 3 bolts and intake manifold from the cylinder head sub-assembly.
Remove the No. 1 intake manifold to head gasket from the intake manifold.
9.REMOVE GROMMET
Remove the grommet from the intake manifold.