Home › Engine / Hybrid System › 2NR-FE STARTING › ENGINE SWITCH › 2016.04–2017.10
RM30M0E _51 Engine / Hybrid System _053950 2NR-FE STARTING _0262388 ENGINE SWITCH A

2NR-FE STARTING  ENGINE SWITCH  INSTALLATION  


PROCEDURE

Hide 89611 1.INSTALL ENGINE SWITCH

a.

Connect the engine switch connector.


b.

Engage the 2 claws to install the engine switch to the No. 2 lower center instrument panel finish panel.


Hide 45287 2.INSTALL LOWER STEERING COLUMN COVER

Hide 55432B 3.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL

Hide 55606 4.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY