Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM SWITCHING VALVE › 2016.04–2016.10
RM30M0E _54 Brake _017099 BRAKE SYSTEM (OTHER) _0092760 VACUUM SWITCHING VALVE A

BRAKE SYSTEM (OTHER)  VACUUM SWITCHING VALVE  INSTALLATION  


PROCEDURE

Hide 25860D 1.INSTALL NO. 2 VACUUM SWITCHING VALVE ASSEMBLY (for 1NZ-FE, 2NZ-FE)

a.

Install the No. 2 vacuum switching valve assembly to the hose bracket with the nut.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the No. 2 air hose and No. 3 air hose to the No. 2 vacuum switching valve assembly with the 2 hose clips.


c.

Connect the No. 2 vacuum switching valve assembly connector.


Hide 25860D 2.INSTALL NO. 2 VACUUM SWITCHING VALVE ASSEMBLY (for 1NR-FE, 2NR-FE)

a.

Install the No. 2 vacuum switching valve assembly to the intake manifold assembly with the bolt.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


b.

Connect the No. 1 air hose and No. 2 air hose to the No. 2 vacuum switching valve assembly with the 2 hose clips.


c.

Engage the No. 1 air hose clamp.


d.

Connect the No. 2 vacuum switching valve assembly connector.


Hide 12611 3.INSTALL NO. 1 ENGINE COVER (for 1NR-FE, 2NR-FE)