Home › Engine / Hybrid System › 2NR-FE FUEL › FUEL INJECTOR › from 2016.04
RM30M0E _51 Engine / Hybrid System _053553 2NR-FE FUEL _0265573 FUEL INJECTOR A

2NR-FE FUEL  FUEL INJECTOR  INSTALLATION  


PROCEDURE

Hide 23250 1.INSTALL FUEL INJECTOR ASSEMBLY

a.
A296029C01
1,1.792 1,1.469 false 3.073,1.74 3.073,1.406 false 0.958,1.823 1.271,1.979 0.313,0.156 10 *1 3.021,1.76 3.333,1.917 0.313,0.156 10 *2
*1 Injector Vibration Insulator
*2 O-ring


Apply a light coat of gasoline or spindle oil to new injector vibration insulators and new O-rings, and then install one to each fuel injector assembly.


b.

Apply a light coat of gasoline or spindle oil to the contact surfaces of the O-ring on each fuel injector assembly.


c.
A383254C01
1.156,0.104 1.396,0.323 0.24,0.219 10 false *a
*a Turn
V100135

Push


While turning the fuel injector assembly left and right, install it to the fuel delivery pipe.

NOTICE:
·

Do not damage the fuel injector assembly or O-ring.

·

Do not twist the O-ring.

·

After installing each fuel injector assembly, check that it turns smoothly. If not, replace the O-ring with a new one.



HINT:
·

Use the same procedure to install the other fuel injector assemblies.

·

Perform "Inspection After Repair" after replacing the fuel injector assembly.

Click hereEngine / Hybrid System>2NR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION




Hide 23891 2.INSTALL NO. 1 FUEL DELIVERY SPACER

a.
A383255C01
1.927,0.313 2.146,0.51 0.219,0.198 10 false *a 1.948,0.75 2.167,0.958 0.219,0.208 10 false *b
*a Fuel Delivery Pipe Side
*b Cylinder Head Sub-assembly Side


Install the 2 No. 1 fuel delivery spacers to the cylinder head sub-assembly.

NOTICE:

Install the No. 1 fuel delivery spacers in the correct direction.



Hide 23814B 3.INSTALL FUEL DELIVERY PIPE

a.

Install the fuel delivery pipe together with the 4 fuel injector assemblies to the cylinder head sub-assembly with the 2 bolts.

Torque:
28 N*m (286 kgf*cm, 21 ft.*lbf)

NOTICE:
·

Do not drop the fuel injector assemblies when installing the fuel delivery pipe.

·

After installing the fuel delivery pipe, check that the fuel injector assemblies turn smoothly.




b.

Connect the 4 fuel injector assembly connectors.


Hide 23901 4.CONNECT FUEL TUBE SUB-ASSEMBLY

a.
A304875C01
1.146,1.948 1.24,1.781 false 0.656,1.938 0.573,1.771 false 1.156,3.208 1.271,3.01 false 1.969,3 2.052,3.219 2.052,3.219 2.125,3 true 2.781,2.708 2.927,2.531 false 2.49,2.51 2.635,2.333 false 2.354,2.594 2.208,2.375 true 0.396,1.646 0.708,1.802 0.313,0.156 10 false *1 0.99,3.188 1.26,3.385 0.271,0.198 10 false *2 2.948,2.406 3.26,2.563 0.313,0.156 10 false *3 1.99,3.219 2.302,3.375 0.313,0.156 10 false *4 2.667,2.198 2.979,2.354 0.313,0.156 10 false *5 1.26,1.646 1.573,1.802 0.313,0.156 10 false *1 2.031,2.281 2.344,2.438 0.313,0.156 10 false *1
*1 Retainer
*2 Nylon Tube
*3 Fuel Delivery Pipe
*4 O-ring
*5 Fuel Tube Connector
V100135

Push


Push the fuel tube connector to the fuel delivery pipe until the fuel delivery pipe connector makes a "click" sound.

NOTICE:
·

Before connecting the fuel tube connector and fuel delivery pipe, check that there is no damage or foreign matter on the connecting part of the fuel delivery pipe.

·

After connecting the fuel tube connector and fuel delivery pipe, check that they are securely connected by trying to pull them apart.




Hide 23841B 5.INSTALL EFI FUEL PIPE CLAMP

a.

Install the EFI fuel pipe clamp to the fuel tube sub-assembly and fuel delivery pipe.


Hide 17880 6.INSTALL AIR CLEANER HOSE ASSEMBLY