Home › Engine / Hybrid System › 2NR-FE FUEL › FUEL PRESSURE REGULATOR › from 2016.04
RM30M0E _51 Engine / Hybrid System _053553 2NR-FE FUEL _0265574 FUEL PRESSURE REGULATOR A

2NR-FE FUEL  FUEL PRESSURE REGULATOR  REMOVAL  


PROCEDURE

Hide 77020A 1.REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

Hide 83320 2.REMOVE FUEL SENDER GAUGE ASSEMBLY

Hide 77785 3.REMOVE FUEL PUMP HARNESS

Hide 77174 5.REMOVE NO. 1 FUEL SUCTION SUPPORT

a.
A300021C01
0.74,2.688 1.625,2.458 true 0.563,2.604 0.875,2.76 0.313,0.156 10 false *a
*a Lock


Disengage the 3 claws while pushing the No. 1 fuel suction support downward.


b.

Using a screwdriver with its tip wrapped in protective tape, release the lock and disengage the 2 claws to remove the No. 1 fuel suction support from the fuel suction tube assembly.

NOTICE:

Do not damage the No. 1 fuel suction support.



c.
A310453

Remove the O-ring from the fuel suction tube assembly.


Hide 77175 6.REMOVE NO. 2 FUEL SUCTION SUPPORT

a.
A246975

Disengage the 3 claws and clamp to remove the No. 2 fuel suction support from the No. 1 fuel suction support.

NOTICE:

Do not damage the No. 1 fuel suction support and No. 2 fuel suction support.



Hide 23280J 7.REMOVE FUEL PRESSURE REGULATOR ASSEMBLY

a.
A246976

Remove the fuel pressure regulator assembly from the No. 1 fuel suction support.

NOTICE:
·

Be careful not to damage the No. 1 fuel suction support.

·

Make sure that foreign material does not enter the fuel passages of the No. 1 fuel suction support.




b.
A310454

Remove the O-ring from the fuel pressure regulator assembly.