This DTC is stored if the ECM receives a malfunction signal from the brake actuator assembly (skid control ECU).
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory |
|---|---|---|---|---|---|
| P1750 | Brake ECU Malfunction | The ECM receives a malfunction signal from the brake actuator assembly (skid control ECU) for 3 seconds (1 trip detection logic). | Vehicle stability control system*1
Anti-lock brake system*2 |
Comes on | DTC stored |
*1: w/ VSC
*2: w/o VSC
Check for brake control system DTCs.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTCs are output (w/ VSC) | B |
| DTCs are output (w/o VSC) | C |
A
Click hereDrivetrain>K312 CVT>CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM>CHECK FOR INTERMITTENT PROBLEMS
B
C
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ANTI-LOCK BRAKE SYSTEM>DIAGNOSTIC TROUBLE CODE CHART