Home › Engine / Hybrid System › 2NZ-FE INTAKE / EXHAUST › EXHAUST PIPE › 2016.07–2016.10
RM30M0E _51 Engine / Hybrid System _017080 2NZ-FE INTAKE / EXHAUST _0091237 EXHAUST PIPE A

2NZ-FE INTAKE / EXHAUST  EXHAUST PIPE  REMOVAL  


PROCEDURE

Hide 89465A 1.REMOVE HEATED OXYGEN SENSOR (for Sensor 2)

Hide 57533B 2.REMOVE FRONT FLOOR CENTER BRACE

Hide 17430 3.REMOVE TAIL EXHAUST PIPE ASSEMBLY

a.
A171152

Remove the 2 bolts and 2 compression springs to separate the tail exhaust pipe assembly from the front exhaust pipe assembly.


b.

Disconnect the 3 exhaust pipe supports to remove the tail exhaust pipe assembly from the vehicle.


c.

Remove the exhaust pipe gasket from the front exhaust pipe assembly.


Hide 17410 4.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.
A171151

Remove the 2 bolts and 2 compression springs to separate the front exhaust pipe assembly from the exhaust manifold.


b.

Disconnect the 3 exhaust pipe supports to remove the front exhaust pipe assembly from the vehicle.


c.

Remove the exhaust pipe gasket from the exhaust manifold.