Home › Engine / Hybrid System › 1NZ-FE ENGINE CONTROL › ECM › 2016.07–2016.10
RM30M0E _51 Engine / Hybrid System _017071 1NZ-FE ENGINE CONTROL _0091207 ECM A

1NZ-FE ENGINE CONTROL  ECM  REMOVAL  


PROCEDURE

Hide 55550 1.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

Hide 89661 2.REMOVE ECM

a.
A179621

Disconnect the 4 ECM connectors.


b.

Disengage the clamp to disconnect the wire harness from the ECM bracket.


c.
A179622

Remove the 2 nuts and ECM with ECM bracket from the vehicle.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace the ECM.



d.
A179625

Disengage the 3 guides to remove the ECM from the ECM bracket.