Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH › from 2017.10
RM30M0E _58 Vehicle Interior _017111 THEFT DETERRENT / KEYLESS ENTRY _0087440 ENGINE HOOD COURTESY SWITCH A

THEFT DETERRENT / KEYLESS ENTRY  ENGINE HOOD COURTESY SWITCH  INSTALLATION  


PROCEDURE

Hide 53510 1.INSTALL ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)

a.
B489848

Apply MP grease to the sliding parts of the engine hood courtesy switch (hood lock assembly).


b.
B491253

Engage the guide to connect the hood lock control cable assembly.


c.
B489846

Install the engine hood courtesy switch (hood lock assembly) with the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


d.

Connect the connector.


Hide 53301 3.ADJUST HOOD SUB-ASSEMBLY