Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY(for RH Side) › from 2017.10
RM30M0E _58 Vehicle Interior _017117 SEAT BELT _0092581 REAR SEAT INNER BELT ASSEMBLY(for RH Side) A

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for RH Side)  INSTALLATION  


PROCEDURE

Hide 73470B 1.INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH

a.

w/o Seat Belt Warning System:

i.
B343497C01
1.646,0.563 1.875,0.354 true 2.313,1.448 1.833,1.365 true 1.906,0.25 2.219,0.406 0.313,0.156 10 false *a 2.333,1.365 2.646,1.563 0.313,0.198 10 false *b
*a Convex
*b Arrow Mark


Install the rear seat inner with center belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:
·

Install the rear seat inner with center belt assembly RH with the arrow mark on the anchor part facing the front of the vehicle.

·

Do not allow the anchor part of the rear seat inner with center belt assembly RH to overlap the convex of the floor panel.





b.
B496338C01
1.802,1.031 2.417,1.083 true 1.75,0.271 2.083,0.167 true 2.104,0.063 2.333,0.26 0.229,0.198 10 false *a 2.448,1 2.667,1.198 0.219,0.198 10 false *b
*a Convex
*b Arrow Mark


w/ Seat Belt Warning System:

i.

Install the rear seat inner with center belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:
·

Install the rear seat inner with center belt assembly RH with the arrow mark on the anchor part facing the front of the vehicle.

·

Do not allow the anchor part of the rear seat inner with center belt assembly RH to overlap the convex of the floor panel.




ii.

Connect the connector.


iii.

Install the wiring harness protector.



Hide 2.INSTALL REAR SEAT CUSHION ASSEMBLY (for Separate Seat Type)

Hide 3.INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)

Hide 4.INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)