73240
1.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Seat LHD)
for 6 Way Seat Type:
| *a | Convex |
Install the front seat inner belt assembly LH with the nut.
Do not place the front seat inner belt assembly LH over the convex areas of the separate type front seat cushion spring assembly.
Engage the 2 clamps.
Engage the claw and 4 clamps.
for 4 Way Seat Type:
| *a | Convex |
Install the front seat inner belt assembly LH with the nut.
Do not place the front seat inner belt assembly LH over the convex areas of the separate type front seat cushion spring assembly.
Engage the clamp.
Engage the claw and 3 clamps.
for 6 way seat type by TMMIN Made:
Engage the 2 hooks to return the separate type front seat back cover.
Engage the 2 hooks to return the separate type front seat cushion cover.
Engage the 4 hooks.
73230
2.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Driver Seat RHD)
| *a | Convex |
Install the front seat inner belt assembly RH with the nut.
Do not place the front seat inner belt assembly RH over the convex areas of the separate type front seat cushion spring assembly.
Engage the clamp.
w/o Front Seat Side Airbag:
Engage the claw and 2 clamps.
w/ Front Seat Side Airbag:
Engage the claw and 3 clamps.
Engage the 3 hooks.
73240
3.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Seat)
for LH Side:
| *a | Convex |
Install the front seat inner belt assembly LH with the nut.
Do not place the front seat inner belt assembly LH over the convex areas of the separate type front seat cushion spring assembly.
w/ Seat Belt Warning System:
Engage the clamp.
Connect the connector.
Engage the claw and 5 clamps.
Engage the 4 hooks.
for RH Side:
| *a | Convex |
Install the front seat inner belt assembly RH with the nut.
Do not place the front seat inner belt assembly RH over the convex areas of the separate type front seat cushion spring assembly.
w/ Seat Belt Warning System:
Engage the clamp.
Engage the 2 clamps.
Connect the connector.
Engage the 4 hooks.
4.INSTALL FRONT SEAT ASSEMBLY