Use the same procedure for both the LH and RH sides.
The procedure described below is for the LH side.
64330
1.REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
81330
2.REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
64711E
3.REMOVE LUGGAGE COMPARTMENT FLOOR MAT
58410B
4.REMOVE DECK BOARD ASSEMBLY
64772
5.REMOVE SPARE WHEEL COVER PAD
64773B
6.REMOVE NO. 2 SPARE WHEEL COVER PAD
64716D
7.REMOVE REAR DECK TRIM COVER
8.REMOVE REAR SEAT ASSEMBLY (for Separate Seat Type)
9.REMOVE REAR SEAT ASSEMBLY (for Fold Down Seat Type)
67918A
10.REMOVE REAR DOOR SCUFF PLATE
62331A
11.DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP
Disconnect the rear door opening trim weatherstrip to the extent that the rear seat side garnish and roof side inner lower garnish and roof side inner garnish can be removed.
64730B
12.REMOVE DECK TRIM SIDE PANEL ASSEMBLY
73360
13.DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY
62551F
14.REMOVE REAR SEAT SIDE GARNISH
62571A
15.REMOVE ROOF SIDE INNER LOWER GARNISH
73310D
16.DISCONNECT REAR CENTER SEAT 3 POINT TYPE BELT ASSEMBLY (for LH Side)
62472A
17.REMOVE ROOF SIDE INNER GARNISH LH (for LH Side)
62471A
18.REMOVE ROOF SIDE INNER GARNISH RH (for RH Side)
73370
19.REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY
Remove the bolt.
Disengage the guide to remove the rear seat 3 point type outer belt assembly.
73143
20.REMOVE SEAT BELT HOLE SEAL
Disengage the 2 claws to remove the seat belt hole seal.