Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR › from 2017.10
RM30M0E _53 Suspension _017095 FRONT SUSPENSION _0090099 FRONT STABILIZER BAR A

FRONT SUSPENSION  FRONT STABILIZER BAR  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

Hide 2.REMOVE STEERING LINK ASSEMBLY

Hide 48810 3.REMOVE FRONT STABILIZER LINK ASSEMBLY LH (w/ Side Rail Reinforcement)

a.
C385303

Remove the nut and front stabilizer link assembly LH from the front stabilizer bar.

HINT:

If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.



Hide 48820B 4.REMOVE FRONT STABILIZER LINK ASSEMBLY RH (w/ Side Rail Reinforcement)

HINT:

Use the same procedure described for the LH side.


Hide 48829A 5.REMOVE FRONT NO. 1 STABILIZER BRACKET LH

a.
C284277

Remove the 2 bolts and front No. 1 stabilizer bracket LH.


Hide 48824A 6.REMOVE FRONT NO. 1 STABILIZER BRACKET RH

HINT:

Use the same procedure described for the LH side.


Hide 48811 7.REMOVE FRONT STABILIZER BAR

a.

Remove the front stabilizer bar from the front suspension crossmember sub-assembly.


Hide 48815E 8.REMOVE FRONT STABILIZER BAR BUSH

a.

Remove the 2 front stabilizer bar bushes from the front stabilizer bar.