48815E
1.INSTALL FRONT STABILIZER BAR BUSH
| *1 | Bush Stopper |
|
Front of the Vehicle |
|
Outside of the Vehicle |
Install the 2 front stabilizer bar bushes to the front stabilizer bar as shown in the illustration.
Install the front stabilizer bar bush to the front stabilizer bar so that the bush stopper of the front stabilizer bar faces the outside of the vehicle.
Install the front stabilizer bar bush so that the cutouts face the front of the vehicle.
48811
2.INSTALL FRONT STABILIZER BAR
Install the front stabilizer bar to the front suspension crossmember sub-assembly.
48829A
3.INSTALL FRONT NO. 1 STABILIZER BRACKET LH
Temporarily install the front No. 1 stabilizer bracket LH to the front suspension crossmember sub-assembly with the 2 bolts.
Fully tighten the bolts to the specified torque, in the order of B then A.
48824A
4.INSTALL FRONT NO. 1 STABILIZER BRACKET RH
Use the same procedure described for the LH side.
48810
5.INSTALL FRONT STABILIZER LINK ASSEMBLY LH (w/ Side Rail Reinforcement)
Install the front stabilizer link assembly LH to the front stabilizer bar with the nut.
If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.
48820B
6.INSTALL FRONT STABILIZER LINK ASSEMBLY RH (w/ Side Rail Reinforcement)
Use the same procedure for the RH side and LH side.
7.INSTALL STEERING LINK ASSEMBLY
51201
8.INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY