Home › Steering › STEERING COLUMN › STEERING WHEEL(for TMMIN Made) › 2017.10–2018.01
RM30M0E _55 Steering _017104 STEERING COLUMN _0333483 STEERING WHEEL(for TMMIN Made) A

STEERING COLUMN  STEERING WHEEL(for TMMIN Made)  REMOVAL  


PROCEDURE

Hide 1.PLACE FRONT WHEELS FACING STRAIGHT AHEAD

Hide 45130 2.REMOVE HORN BUTTON ASSEMBLY

Hide 45100 3.REMOVE STEERING WHEEL ASSEMBLY

a.
C286519C01
0.865,0.667 1.281,0.479 1.281,0.479 0.854,0.542 true 1.313,0.396 1.542,0.552 0.229,0.156 10 true *a
*a Matchmark


Remove the steering wheel set nut.


b.

Put matchmarks on the steering wheel assembly and steering main shaft.


c.

Disconnect all the connectors from the spiral cable sub-assembly.


d.
C286520C01
2.323,1.667 2.896,1.115 true 0.667,3.135 0.865,3.323 0.198,0.188 10 true *a 3.219,2.198 3.427,2.354 0.208,0.156 10 true *b 2.927,1.021 3.292,1.229 0.365,0.208 10 true SST
*a Hold
*b Turn


Using SST, remove the steering wheel assembly.

SST
09950-50013  (09951-05010, 09952-05010, 09953-05020, 09954-05031)

NOTICE:

Apply a small amount of grease to the threads and tip of SST (center bolt) before use.



Hide 45116 4.REMOVE NO. 1 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch)

a.
C289131

Remove the 2 screws.


b.

Disengage the 4 claws and 5 pins and remove the No. 1 steering wheel ornament.


Hide 84250A 5.REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch)

Hide 45184 6.REMOVE LOWER STEERING WHEEL BOSS COVER

a.
C284825

Disengage the 6 claws and remove the lower steering wheel boss cover.